Особенности и функции различных типов термопластавтоматов.

Говоря отермопластавтоматы, по-видимому, большинство людей не должны чувствовать себя незнакомыми. Так называемая машина для литья под давлением, по сути, также может называться литьевой машиной. Это основное формовочное оборудование, в котором используются пластмассовые формовочные формы для изготовления пластмассовых изделий различной формы. Его можно разделить на множество различных категорий в зависимости от метода пластификации, метода передачи машины и метода работы. Чтобы помочь пользователям лучше использовать ценностьтермопластавтоматы, Tongjia Heavy Industries, a professional manufacturer of термопластавтоматы, will introduce the characteristics and scope of application of different types of термопластавтоматы in detail.
Первый тип: горизонтальный термопластавтомат.
This is a relatively common type of термопластавтомат. The clamping part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its characteristics are: the body is short, easy to operate and maintain; the machine has a low center of gravity, and the installation is relatively stable; after the product is ejected, it can automatically fall by gravity, and it is easy to realize fully automatic operation. At present, most of the термопластавтоматы on the market adopt this type.

Второй тип: вертикальныйтермопластавтомат

In this type of термопластавтомат, the clamping part and the injection part are on the same vertical centerline, and the mold is opened in the vertical direction. Therefore, it occupies a small area, it is easy to place inserts, it is convenient to load and unload molds, and the materials falling from the hopper can be plasticized more uniformly. However, the product is not easy to automatically fall after being ejected, and must be removed by hand, which is not easy to realize automatic operation. Vertical термопластавтоматы are suitable for small термопластавтоматы. Generally, термопластавтоматы below 60 grams are more commonly used, and large and medium-sized machines are not suitable.

The third type: Angle термопластавтомат

The injection direction of the angle термопластавтомат is on the same surface as the mold interface. It is particularly suitable for processing flat products where gate marks are not allowed in the machining center. It occupies a smaller area than a horizontal термопластавтомат, but the inserts placed in the mold are easy to tilt and fall. This type of термопластавтомат is suitable for small machines.

The fourth type: multi-mode turntable термопластавтомат

Это особенныйтермопластавтомат with multi-station operation. Its characteristic is that the mold clamping device adopts a turntable structure, and the mold rotates around the shaft. This type of термопластавтомат gives full play to the plasticizing capacity of the injection device, which can shorten the production cycle and increase the production capacity of the machine.